Ariens Choke Cables
Ariens choke cables connect the dashboard choke control to the carburettor choke plate, enriching the fuel mixture for cold starting by restricting airflow into the engine. The replacement choke cable Ariens and Ariens engine choke cable assemblies feature precise length specifications, whilst the snowblower choke cable and Ariens throttle choke cable ensure proper plate positioning through mechanical linkage. From manual choke systems on older models to integrated throttle-choke controls on newer engines, these steel cables enable reliable cold-weather starting. We hold choke cables in stock and sell worldwide across all Ariens models.
Available Ariens Choke Cables
Choke Control
T-RCL29005800
Ariens
£33.66
In Stock
Controlknob(Throttlecable)
T-14810400
Ariens
£13.56
In Stock
Handbrake Cable
T-529473100
Ariens
£117.23
In Stock
Cable LM Hand
06900528
Ariens
£7.79
In Stock
Cable Control
06944500
Ariens
£41.11
In Stock
Cable Brake Parking
06900706
Ariens
£26.41
Available
Cable Pedal Lock
T-529473200
Ariens
£118.46
Available
Cable Drive Control
06900535
Ariens
£33.76
Available
Choke Cable
01588400
Ariens
--
View More
Choke Cable 28 (Nt)
T840-261C
Ariens
--
View More
Choke Cable
06918300
Ariens
--
View More
Cable, Choke Cable
00581800
Ariens
--
View More
Frequently Asked Questions
How do I adjust a choke cable?
Locate the clamp where the cable housing attaches to the control panel. Loosen the clamp screw, adjust the cable position so the choke plate closes fully when the control is engaged, then retighten the clamp. Some models use a threaded adjustment at the carburettor end. Set the control to the choke position first, ensure the plate is fully closed, then secure the cable housing. Test operation through several cycles to confirm reliable plate movement.
Can I use a universal choke cable?
Universal cables work if you can match the length and create proper Z-bends at both ends. Cut the cable to the correct length, ensuring the housing terminates at the clamp points. Form the Z-bend carefully to match the original cable's attachment points. Whilst universal cables cost less, OEM cables guarantee proper fit and eliminate the need for custom bending, making installation simpler and more reliable.
What if my choke cable pulls out of the control?
The cable housing clamp has failed or wasn't tightened properly. Remove the control assembly, reinsert the cable housing into the clamp, and squeeze the clamp firmly with pliers whilst tightening the screw. If the clamp is damaged or the housing end is frayed, replace the cable. Operating with a loose cable results in inconsistent choke operation and difficult starting, particularly in cold conditions.
Should the choke cable have any slack?
Minimal slack is acceptable in the off position, but the cable must close the choke plate completely when engaged. Too much slack prevents full choke closure. Excessive tension keeps the plate partially closed even when choke is off, causing rough running and black smoke. Proper adjustment provides full choke closure when engaged and complete plate opening when off, enabling smooth engine operation across all conditions.
Why won't my engine start even with the choke on?
The choke cable may not be closing the choke plate fully. Remove the air filter and operate the choke control whilst observing the carburettor. The choke plate should close completely when the control is in the choke position. If the plate doesn't close fully, the cable needs adjustment or replacement. A stuck choke plate or damaged carburettor linkage can also prevent proper choke operation.