Ariens Mower Blades
Ariens mower blades are precision-engineered cutting components made from heat-treated alloy steel, designed for superior wear resistance and long-lasting performance. From replacement Ariens blades to Ariens cutting blade options, including genuine Ariens blades and Ariens lawn mower blades for all deck sizes, these USA-made components deliver clean, efficient cuts. Available in standard, high-lift, and mulching configurations for walk-behind, zero-turn, and lawn tractor applications, quality blades are essential for lawn health. We hold mower blades in stock and sell worldwide.
Available Ariens Mower Blades
Cutting Blade 18 30 Deg .5 Offset
04771200
Ariens
£22.49
In Stock
Cutting Blade 14.83
04265400
Ariens
£21.51
Available
Genuine Hgm 12" R/H / Centre Angled Blade
T-16000100
Ariens
£19.83
In Stock
Genuine Hgm L/H Or R/H Angled Blade
T-16000300
Ariens
£19.49
In Stock
15 R/H Hgm Blade
T-16000400
Ariens
£20.43
In Stock
Genuine Hgm L/H Or R/H 15" Flat Blade
T-16000500
Ariens
£20.43
In Stock
Genuine Hgm R/H 12" Flat Blade
T-16000600
Ariens
£20.43
In Stock
Blade Scarifier Tine
T-169384300
Ariens
£15.48
In Stock
Blade, Mulch 16.25 48" 52"
05244100
Ariens
£23.47
In Stock
Blade 16.19 Mower (Hilift)
00450200
Ariens
£25.43
In Stock
Blade Mower 15.00
04769800
Ariens
£21.51
In Stock
Blade Edger
03789800
Ariens
£17.88
Available
Frequently Asked Questions
How often should I replace my Ariens mower blades?
Replace blades annually or after 25-50 hours of use, whichever comes first. Blades in sandy or abrasive soil conditions wear faster and may need replacement twice per season. Even with regular sharpening, blade material wears thin over time, reducing cutting effectiveness. Keep a spare set ready so you can continue mowing whilst sharpening or replacing worn blades.
What's the difference between high-lift and standard blades?
High-lift blades have increased sail height that creates stronger airflow, lifting grass more aggressively for cleaner cuts and better discharge. They're ideal for bagging or side-discharge but require more engine power. Standard blades work well for regular mowing conditions, using less power whilst providing good cutting performance. Choose based on your typical mowing conditions and desired results.
Why is blade balance so important?
Unbalanced blades cause severe vibration that damages spindle bearings, bends crankshafts, and creates uneven cuts. Each side of the blade must weigh the same to rotate smoothly at high speed. After sharpening, always check balance using a blade balancer or nail-in-wall method. Remove material from the heavy side until the blade sits level.
Should I sharpen or replace badly nicked blades?
Deep nicks or gouges typically require replacement rather than sharpening. Removing enough material to eliminate deep damage can make the blade too thin, unbalanced, or weaken its structure. Shallow nicks can be filed out during normal sharpening. If you're unsure, replace the blade—the cost is minor compared to the risk of blade failure during operation.
Do new Ariens blades need sharpening before first use?
No, new OEM blades are properly sharpened during manufacturing. The factory edge is coated with paint that wears off after the first few uses, revealing the sharp cutting edge. Installing new blades immediately provides optimal cutting performance. Focus on proper installation, correct torque, and blade balance rather than pre-sharpening new blades.