HomeProductsMachinesArticlesAboutReviewsSupport

Ariens Chutes

Ariens Chutes
Ariens snowblower chutes channel processed snow from the auger housing upward and outward, directing discharge away from the operator and onto target areas with precision control. The Ariens discharge chute and replacement chute Ariens assemblies rotate up to 200 degrees, whilst the Ariens snow thrower chute and Ariens chute assembly include mounting hardware, rotation gears, and deflector components. Available for all bucket widths from compact 24-inch to professional 32-inch models, these fabricated steel chutes withstand high-volume snow flow. We hold chutes in stock and sell worldwide.

Frequently Asked Questions

Why does snow build up inside my discharge chute?
Wet, heavy snow sticks to chute walls and gradually narrows the opening, reducing discharge distance. Apply silicone spray, cooking spray, or specialised non-stick coating to the chute interior before use. Some operators apply car wax or fluid film. Clear buildup during use by occasionally tapping the chute or running dry snow through to scour the interior clean.
How do I remove and reinstall a discharge chute?
Remove the chute crank rod, gear cover, and mounting bolts securing the chute to the auger housing. Disconnect any cables attached to the deflector. Installation reverses this process - position the chute over the housing opening, insert mounting hardware finger-tight, install cables and gears, then tighten all fasteners. Ensure cables have proper tension and the chute rotates freely before operation.
Are discharge chutes interchangeable between models?
Chutes are generally model-specific based on bucket width and mounting configuration. A 28-inch model chute won't fit a 24-inch machine, and older models have different mounting patterns than newer ones. Some chutes within the same series and bucket size may interchange, but verify exact compatibility using your model number before purchasing to ensure proper fit and function.
What's the proper chute rotation range?
Most Ariens chutes rotate approximately 200 degrees, throwing snow from straight ahead to either side and slightly behind. The chute should never be forced beyond its designed range, which can damage gears or the mounting bracket. If you need to discharge directly behind the machine, make multiple passes or reposition rather than over-rotating the chute beyond its mechanical limits.
Can a cracked chute be repaired or must it be replaced?
Small cracks can sometimes be welded by professionals, but cracks near rotation points or where the chute mounts to the housing typically require replacement. Plastic chutes cannot be reliably repaired and need replacement when cracked. Even repaired metal chutes may crack again under the stress of heavy snow discharge, so replacement is usually the more reliable long-term solution.