Ariens Auger Belts
Ariens auger belts transmit power from the engine to the auger and impeller assembly, processing snow through a high-load drive system that requires specialised belt construction for shock resistance. The Ariens snowblower auger belt and Ariens snow thrower auger belt feature Kevlar reinforcement, whilst the Ariens auger drive belt and replacement auger belt for Ariens models withstand engagement shock and variable load conditions. From single-belt systems to dual-belt Hydro Pro configurations, these precision-matched belts ensure reliable snow removal performance. We hold auger belts in stock and sell worldwide.
Available Ariens Auger Belts
Sweeper Belt Decal
T-35891200
Ariens
£2.86
In Stock
Pto Drive Belt
T-22951900
Ariens
£41.89
In Stock
Transmission Belt
T-22951800
Ariens
£49.64
In Stock
Belt Retaining Bracket
T-307187100
Ariens
£6.68
In Stock
Engine To Cutter Deck Belt
T-22949800
Ariens
£32.67
In Stock
Belt Tension Plate
T-32731000
Ariens
£61.98
In Stock
PGC Belt Tension Adjust Trunnion
T-183003800
Ariens
£26.04
In Stock
V Belt
07236900
Ariens
£33.27
In Stock
Zero Turn V Belt
07200805
Ariens
£37.19
In Stock
V-Belt - Raw Edge
07200815
Ariens
£94.86
In Stock
Transaxle V-Belt - Wrapped
07201002
Ariens
£36.61
In Stock
Zero Turn V Belt Cogged
07200806
Ariens
£31.68
In Stock
Frequently Asked Questions
How do I know when my auger belt needs replacing?
Signs include reduced throwing distance, black rubber dust around the belt area, visible cracks or glazing on the belt surface, and the auger slipping under load. The belt should have approximately 1/2 inch of deflection when properly tensioned. If adjustment no longer restores performance or the belt shows physical damage, replacement is necessary. Most auger belts last 1-2 seasons with regular use depending on conditions.
Why does my auger belt keep slipping off?
Misaligned pulleys are the most common cause, often from improper reassembly after repairs. Belt guides may be bent or missing, allowing lateral movement. Worn bearings in pulleys create wobble that throws belts. Using the wrong belt size or installing the belt incorrectly during replacement causes tracking problems. Check that the belt routes inside the idler pulley and that all components align properly before operation.
Should I replace both belts on a dual-belt system?
Yes, always replace both belts together on dual-belt Hydro Pro systems. Belts wear at different rates, and mixing old with new creates uneven load distribution that accelerates wear on the new belt. Matched belts ensure balanced power transmission and extend overall system life. The modest additional cost of a second belt is far less than premature failure and repeated replacement labour.
Can I use an aftermarket belt instead of OEM?
Quality aftermarket belts from reputable manufacturers work adequately, but OEM belts are engineered specifically for Ariens engagement systems and load profiles. Cheap aftermarket belts often use inferior materials that fail quickly under shock loading. If using aftermarket, choose brands known for outdoor power equipment applications. For critical reliability and longest service life, OEM belts remain the safest choice.
What's the proper belt routing for my model?
Belt routing varies significantly by model and year. The belt must route inside the idler pulley - this is critical and often overlooked. Consult your operator's manual for the specific routing diagram. When replacing, photograph the old belt's path before removal. Incorrect routing causes immediate belt damage or prevents proper engagement. Most service issues after belt replacement stem from improper routing rather than defective belts.