Ariens Skid Shoes
Ariens skid shoes regulate snowblower height above the clearing surface, protecting the scraper bar from excessive wear whilst preventing auger contact with the ground. The Ariens skid shoe kit and snowblower skid shoes Ariens components include steel and composite options, whilst replacement skid shoes and Ariens skid plates provide adjustable height control for different surface types. Available in traditional steel, non-abrasive polymer, and roller configurations, these wear items ensure proper machine clearance. We hold skid shoes in stock and sell worldwide for all models.
Available Ariens Skid Shoes
Skid Shoe, Reversible - Black
02483851
Ariens
--
View More
Kit- Blade Skid Shoe
75100600
Ariens
--
View More
Skid Shoe
02025800
Ariens
--
View More
Runner, Skid Shoe-1/2" Flange
02483043
Ariens
--
View More
Kit, Steel Skid Shoes (2)
72001500
Ariens
--
View More
Runner, Skid Shoe
04148959
Ariens
--
View More
Kit,Pro Skid Shoes Orange
72104500
Ariens
--
View More
Kit, Long Skid Shoe
72105600
Ariens
--
View More
Kit, Skid Shoes Orange Ariens
72101100
Ariens
--
View More
Runner, Skid Shoe-1/2" Flange
02483059
Ariens
--
View More
Runner - Skid Shoe
03075553
Ariens
--
View More
Kit,Composite Skid Shoe,Snotek
72001300
Ariens
--
View More
Frequently Asked Questions
How often should skid shoes be replaced?
Steel skid shoes typically last 3-5 seasons, whilst polymer shoes may need replacement every 1-2 seasons depending on usage. Check wear annually - when shoes are worn thin or you can no longer adjust them to maintain proper scraper height, replacement is due. Operating on gravel or rough surfaces accelerates wear significantly compared to smooth pavement.
How do I properly adjust skid shoe height?
Place spacers under the scraper bar - 1/8 inch for paved surfaces, 1/2 inch for gravel. Loosen all skid shoe bolts, press shoes down against the surface, then tighten securely. Both sides must be adjusted equally to prevent the machine from pulling to one side. Adjust shoes whenever you adjust the scraper bar to maintain consistent clearance.
Can I use one steel and one polymer skid shoe?
Never mix shoe types. Different materials have different friction coefficients, causing the machine to pull toward the side with higher friction. This makes the snowblower difficult to control and creates uneven wear patterns. Always replace skid shoes in pairs using the same material type to ensure balanced operation and even wear across both sides.
Do roller skid shoes improve performance?
Roller skid shoes reduce friction and make the machine significantly easier to push and manoeuvre, especially for operators with limited strength. They work well on smooth surfaces but can bind or break on rough terrain. Rollers require bearings that can freeze or fail in harsh conditions. They're an upgrade option worth considering if you primarily clear smooth, paved surfaces and want easier manoeuvrability.
What's the difference between steel and polymer skid shoes?
Steel skid shoes are durable and long-lasting but can damage decorative surfaces and leave rust marks on concrete. Polymer (plastic) skid shoes are gentler on surfaces, don't rust, and make the machine easier to manoeuvre due to lower friction. However, they wear faster than steel, especially on abrasive surfaces. Choose based on your primary surface type and replacement frequency preference.