Ariens Blades & Cutting Parts
Ariens blades and cutting parts deliver precision mowing performance through heat-treated alloy steel construction that maintains sharp edges under demanding conditions whilst providing mulching and discharge capabilities. From Ariens mower blades and Ariens lawn mower blades to Ariens mulching blades and specialised components, these cutting elements ensure clean grass cutting with minimal tearing. Ariens blade adapters, spindles, deck pulleys, and complete cutting systems work together with properly balanced blades to prevent vibration and bearing damage. We hold Ariens blades and cutting parts in stock and sell worldwide.
Available Ariens Blades & Cutting Parts
Genuine Hgm 12" R/H / Centre Angled Blade
T-16000100
Ariens
£19.83
In Stock
Genuine Hgm L/H Or R/H Angled Blade
T-16000300
Ariens
£19.49
In Stock
15 R/H Hgm Blade
T-16000400
Ariens
£20.43
In Stock
Genuine Hgm L/H Or R/H 15" Flat Blade
T-16000500
Ariens
£20.43
In Stock
Genuine Hgm R/H 12" Flat Blade
T-16000600
Ariens
£20.43
In Stock
Blade Scarifier Tine
T-169384300
Ariens
£15.48
In Stock
Blade, Mulch 16.25 48" 52"
05244100
Ariens
£23.47
In Stock
Blade 16.19 Mower (Hilift)
00450200
Ariens
£25.43
In Stock
Blade Mower 15.00
04769800
Ariens
£21.51
In Stock
Cutting Blade 18 30 Deg .5 Offset
04771200
Ariens
£22.49
In Stock
Blade Edger
03789800
Ariens
£17.88
Available
Cutting Blade 14.83
04265400
Ariens
£21.51
Available
Frequently Asked Questions
How often should I sharpen or replace mower blades?
Sharpen blades every 25 hours of mowing or when you notice ragged grass tips rather than clean cuts. Replace blades annually or when they've been sharpened so many times that the sail (upturned back edge) is worn away or the blade has lost significant material. Dull blades tear grass creating brown tips, stress the engine, and waste fuel. Damaged blades with bent tips or cracks must be replaced immediately for safety.
Why is blade balance important?
Unbalanced blades create vibration that damages spindle bearings, deck components, and engine crankshafts over time. Vibration also creates an uneven cut and operator fatigue. After sharpening, always check balance using a blade balancer or by hanging the blade on a nail through the centre hole. Remove material from the heavy side until the blade balances horizontally. Even slight imbalance becomes severe at 18,000 RPM blade tip speeds.
Can I sharpen blades myself or should I use professional service?
Home sharpening with an angle grinder or file works well if you maintain the original cutting angle (typically 30-40 degrees) and balance the blade afterwards. Remove only enough material to restore a sharp edge. Professional sharpening ensures precise angles and perfect balance but costs more. For safety-critical items spinning at high speeds, proper technique matters more than who does the work. If uncertain about your skills, professional service provides peace of mind.
What's the difference between standard and mulching blades?
Standard blades have relatively flat profiles with simple cutting edges designed to lift and discharge grass clippings. Mulching blades feature additional cutting surfaces and curved profiles that create airflow patterns keeping clippings airborne longer for multiple cuts. This creates finer clippings that decompose quickly. Mulching blades require more engine power and work best with frequent mowing. Use the blade type designed for your intended cutting method.
How do I know if spindles or blade adapters need replacement?
Excessive vibration, uneven cutting, or unusual noises indicate spindle bearing failure. Spindle housings that leak grease or feel rough when rotated by hand need replacement. Blade adapters with rounded or stripped splines can't hold blades securely, causing dangerous blade slip. Cracks in adapters or housings require immediate replacement. These components experience tremendous stress - never delay replacement of damaged spindle or adapter parts as failure during operation creates serious safety hazards.